According to various sources, globally we consume about 80 million tons of road salt per year. Of that, the United States consumes about 25 percent in a heavy winter. Interestingly, Europe consumes just 7-8 million tons – or roughly ?rd of what the U.S. uses in the same time period. All of this despite Europe being twice the U.S. population with roughly the same-sized land mass and snowbelt.
How is it that we are using three times as much deicer with just half the population size?
If you ask 100 people in the snow business this question, you might get 50 different answers. However, here’s how I see it.
Tort law is No 1. Slip-and-fall lawsuits are expensive, with the average lawsuit settlement reaching over $100,000. That is everything from the “staged” fall in the supermarket to the person in leather dress shoes slamming their face on a snow-filled parking lot. The cost of settling these lawsuits far exceeds the cost of just blasting the surface with deicers. So, the prevailing mindset is, “If a little does a good job, more will do a better job.” We’ll soon learn why that mindset is often wrong.
The second issue is the advent of SUV and 4WD in the hands of people who shouldn’t be driving in snow. If you live in the Snowbelt, it’s likely you or a neighbor own a four-wheel or all-wheel drive vehicle. Those vehicles enable travel for a segment of our population that does not respect winter driving and thinks they don’t need to leave for work early on snow days – i.e. “The streets need to be black and wet!”
Adding insult to injury is that our climate is changing. We see more and more ice storms creeping North into the traditional Snowbelt. These ice storms consume 3-5 times the quantity of deicer than comparable snow storms. Fighting an ice storm is an all-chemical fight. In other words, a plow and shovel are useless for ice removal until that ice has been hit with chemical deicer first.
We’re seeing this problem all over the Southeast U.S. Many communities are now ramping their snow-fighting equipment following unexpected and sometimes catastrophic winter weather events. Take Atlanta and Dallas. In recent years, these communities were paralyzed by ice storms that closed down cities for days. Many of these disasters could’ve been avoided with more sufficient resources to manage wide-spread ice events. But now we’re seeing the aftermath, an over-reaction: too much willingness from affected communities to apply product during storms regardless of whether the conditions demand it.
Yes, it’s important to be prepared, and no one would argue that point. But now we need to take a closer look at how our behaviors might be creating bigger and more complicated problems.
Everything in life is a consequence for an action. Usually, the consequences are desired, such as melting away snow and ice so the surface is safely passable. However, when we increasingly slather our road surfaces with deicers, where does the run-off go? This is the adverse consequence of deicing use – because every pound of deicer purchased is disposed of back into the environment.
Think about that. Every pound purchased is then applied to the property of that purchaser – at which point the deicer either seeps into the ground, runs off with storm water, or if it’s chloride-based, reacts with steel to corrode bridges, vehicles, and electrical systems. Unfortunately, these potential adverse consequences for our transportation and infrastructure are just the tip of the iceberg.
Salt is sodium chloride. When sodium chloride seeps into ground water, aquifers, lakes, streams, and reservoirs, it contaminates fresh water and causes potential problems at many levels. Public and private well water supplies can experience elevated levels of sodium in the water, which is problematic for people with hypertension. In that case, it’s the sodium that’s the problem. But in other cases, it’s not the sodium; it’s the chloride. When salt runs off into fresh water surface bodies such as lakes and streams, it elevates the surface levels of chloride which may reach toxic levels for fish, plants, and other aquatic species.
As we already know, salt demand in the U.S. is exploding. And with this explosion comes an increase in new and often unproven global sources of salt entering the U.S. market. This isn’t always good. A New England region user who recently switched from a Chilean-sourced to North African-sourced salt provider later tested their product to find high levels of heavy metals. Unfortunately, those contaminants were high enough to break through the company’s storm water discharge permit threshold limits. The consequence: an EPA violation of a $250,000 fine, and a final warning that one more violation would close a nearly 100-year-old manufacturing business – thereby idling hundreds of employees. All of this from what should have been innocuous, routine winter ice control.
If we plan on preserving our private facilities, storm water management control centers, and environment, we need to be careful with new-to-market, unvetted global salt sources. It’s important all buyers of deicers and salt know exactly what they are buying, where it comes from, and that they demand for detailed certified breakdown of typical ingredients including contaminants and metals.
But it’s also just as important to recognize that this problem isn’t only limited to global markets. Recently, a U.S. source of magnesium chloride start showing detectable levels of poly chlorinated biphenyls (PCBs) in their liquid magnesium chloride deicer at a community in the Pacific northwest. PCBs are a major environment concern since they not only take hundreds of years break down, but they’re also carcinogenic. While the levels were relatively low, the fact is that PCB contamination in the Great Salt Lake carried over into product that was applied to roads in a state 800 miles away. That goes to show how widespread and interconnected these issues are, and understandably, why environmentalists and regulatory agencies are not enamored with polluting their highways and adjacent lands.
Moreover, areas with high population concentration and high use of deicing products are now seeing near-toxic levels of chlorides in fresh water; that is, toxic to people and fish. Flint, Mich., had lead problems that made major news headlines for over a year. Soon, we can expect to see high sodium levels and chloride levels in other communities threatening aquatic life and potable water purity. Is it possible that deicing usage might one day evoke the same public outcry as Flint did with its lead? If the environmental damage all falls back on the mismanagement of winter deicing operations, then the answer is yes.
These problems are not limited to road salt, but with upwards of 20 million tons of salt hitting the US environment every year. We need to look at all the products we use in winter deicing no differently than we would look at the fertilizers, herbicides, and pesticides used to manage agriculture and even right to what we put on our lawn. If you’re on a well, think about what you are applying to the surface of your property as it migrates down toward your water source. The deicing public is so focused on getting sidewalks, roadways, and surfaces free of snow to avoid slip-and-fall or crash potentials – they’re not thinking about the unintended problems from insanely high deicing use.
With increased attention on groundwater recharge, many property owners are now using porous pavement surfaces to enable groundwater recharge more readily. These porous surfaces facilitate groundwater recharge, but they also require more deicer to keep them unplugged from ice. We can quickly see how this might become counterproductive: save the surface for safe passage; destroy the groundwater with contaminants in the process. Keep in mind that when we pollute our drinking water sources, cleanup is incredibly expensive and difficult.
From what the state puts on our interstates and roads to what the homeowner buys at retail… all of it ends up back in our environment. There is little to no regulatory oversight, labeling requirements, or enforcement until after this type of pollution becomes the problem of the property owner. Once again, an adverse consequence.
No easy answers here. My viewpoint is that education should be first on our list. The motoring and traveling public must be more understanding during snow events. They cannot set the bar so high that we are slathering every horizontal surface with excessive deicers to allow for winter travel at dry pavement speeds. After that, we need to be better about informing property owners on the potential problems from heavy applications. We need to carefully respect that if we are adjacent to wetlands or on top of an aquifer, we must use much less product, or in some cases, a different product as to not potentially threaten those resources. If we make a broad, concerted effort to educate the market, it will benefit all of us. Finally, we need to use the best available practices and methods to reduce the amount of product we apply. This is so we meet needs and avoid over-applying – all while keeping our people and environment safe.
We need to advocate sensible deicing practices and help educate people who have no understanding of what we, snow fighters and related businesses, do. Most importantly, we need to encourage everyone to use less. Another 30 years of hitting our surfaces as we do now will find us saddled with obscene contamination cleanup costs… and that’s IF we even have the ability to clean up the mess.
Use less, educate more, and advocate for TORT reform.